| TECHNICAL PARAMETERS |
| Test principle | Test principle of chemistry items: Photoelectric colorimetry. Test principle of physical and chemical items: Refraction method, transmittance absorbance. |
| Test items | Urobilinogen (UBG), bilirubin (BIL), ketone body (KET), blood (BLD), protein (PRO), nitrite (NIT), leukocyte (LEU), glucose (GLU),
pH value (pH), specific gravity (SG), vitamin C (VC) (optional), microalbumin (MALB) (optional), creatinine (Cr) (optional) and
urinary calcium (Ca) (optional). |
| Physical and chemical test items | Specific gravity (optional), turbidity (optional), color (optional) and conductivity (optional). |
| Test speed | 240 samples/ hour |
| Sample type | Urine |
| Sample volume | Chemistry analysis item: Min. volume: 1.6mL non-centrifuged urine; aspiration volume: about 0.6mL; Chemistry analysis item +
physical and chemical item: Min. volume: 3.0mL non-centrifuged urine; aspiration volume: about 2.0mL. |
| Volume of sample to be tested | 60 samples. The volume can be extended to 320 samples if pre-storage tray and reclaiming tray modules are installed. |
| Volume of strip bin | A single strip bin holds at least 300 strips |
| Maximum capacity of waste strip bin | 400 strips |
| Temperature and humidity monitoring function of strip bin | It has internal temperature and humidity monitoring function and it will alarm if they exceed the set range. |
| Strip carrying stability | 3 days |
| STAT function | Special STAT position, available for sample test at any time |
| Sample barcode identification | Built-in barcode reader (laser), sample barcode can be read automatically An external barcode reader (red light),manual scanning
of barcode (optional). |
| LIS port | Serial port LIS |
| Connection with LIS system | Bidirectional communication with LIS system is supported |
| Test results storage capacity | Not less than 100,000 pieces of data |
| Weight | 67kg; 102kg if pre-storage tray and reclaiming tray modules are installed |
| Power | 200 VA |
| Size (L×W×H) | 680 mm×700 mm×590 mm 1360 mm×900 mm×590 mm if pre-storage trayand reclaiming tray modules are installed |
| Ambient temperature | 10 ~30 ℃ |
| Relative humidity | below 70% |
| Atmospheric pressure | 75kPa~106kPa |
| Supply voltage | 100-240V~ 50/60Hz |
| Intensity of light | prevent direct sunlight |
